Home
PowerScape System
PowerNode Products
LM-1302
LM-5300
LM-5400
LM-5500
PowerScape Software
LM-5700
SPEED System
LD-1100
LD-1200
LDS-1050
LDS-1060
LDS-1070
LDS-1081
Whats New
Support
Contact Us
About Us

Enetics PL-5380 Wireless Pulse Data Logger

Who Needs Another Logger?
Let's face it.  There's never been much challenge in logging the output from a pulse initiator source.  The challenge always comes in communicating the data and then making use of it.   Drive-by, telephone lines, stringing Cat 5 Ethernet cables, ultra-low rate communications over power lines...or worse yet:  walk-up data collection; they all present their own problems and levels of inconvenience.

Data Communications Done Your Way
Enetics new PL-5380 is a versatile 4-channel pulse logger of course.  But first and foremost, it's a configurable wireless communications engine.  This is because, the PL-5380 has a general-purpose communications socket integrated into the mother board that can be equipped with any one of 5 different data communications modules  in just minutes - and in the field at the install site.  Each of the modules uses the same interface and plugs into the master socket on the PL-5380 mother board.   The 5 different communications modules are:

·        
Wi-Fi (802.11 b/g)
·        
GPRS (GSM cellular packet data)
·        
1XRTT (CDMA cellular packet data; certified on the Verizon Network)
·        
Zigbee mesh network radio
·        
Telephone modem (POTS)

Field Install Friendly
Communications configurability means fewer-to-no repeat trips to the install site.  Now the installation technician can choose the type communications module to match the resources available at the site.   Whether Ethernet using Wi-Fi (802.11 b/g), telephone, cellular packet data, or mesh radio; the technician can just plug in the necessary module and the data starts to flow.

Now Enetics Offers Mesh Radio Communications
With the PL-5380 Wireless Pulse Data Logger, Enetics now brings a family of Zigbee-based communications modules to our growing family of metering products.   Whether Point-to-Multipoint, Mesh, or long-range mesh extenders Enetics offers radio solutions to keep you connected and your data flowing:

Topology

Protocol

Range

Data Rate

Point to Multipoint

IEEE 802.15.4

300 ft  to 1 mile

250 kbps

Mesh

Zigbee®-Pro

400 ft to 2 miles

250 kbps

Mesh

Zigbee® Smart Energy Public Profile

400 ft to 2 miles

250 kbps

Point to Multipoint

Or

Mesh

Proprietary - Network Repeater/Extender

15 Miles

10/125 kbps

 

 
 
 all contents copyright © 2012 Enetics, Inc. - email info@enetics.com with all comments and questions